Drain - Revision history

Joceil.infante at 07:08, 17 August 2017

2017-08-17T07:08:58Z

Joceil.infante at 04:33, 17 August 2017

2017-08-17T04:33:49Z

Joceil.infante: Created page with "[1] Near horizontal pipe suspended within a building or buried in the ground to which stacks or ground floor appliances are connected. Note: In accordance to BS EN 12056-3:200..."

2017-05-02T04:46:09Z

Created page with "[1] Near horizontal pipe suspended within a building or buried in the ground to which stacks or ground floor appliances are connected. Note: In accordance to BS EN 12056-3:200..."

New page

[1] Near horizontal pipe suspended within a building or buried in the ground to which stacks or ground floor appliances are connected.
Note: In accordance to BS EN 12056-3:2000, the near horizontal drainage pipes are to be designed based on open channel principle. As such for pipes at a gradient of less than 10 ° from horizontal are designed as drains with maximum 70% fill rate.

The flow in offsets less than 10° to the horizontal shall be calculated as a drain with a filling degree of not more than 70% unless national and local regulation and practice states otherwise.

[2] Includes any canal, culvert, conduit, river or watercourse

[3] Pipeline, usually underground, designed to carry wastewater from a source to a sewer

== References: ==
# BS EN 12056-5:2000
# Code of Practice on Surface water drainage 6th Edition –Dec 2011
# BS EN 752:2008

@@ Line 1: / Line 1: @@
 * Near horizontal pipe suspended within a building or buried in the ground to which stacks or ground floor appliances are connected.
-*The flow in offsets less than 10° to the horizontal shall be calculated as a drain with a filling degree of not more than 70% unless national and local regulation and practice states otherwise.
+'''Note:''' In accordance to BS EN 12056-3:2000, the near horizontal drainage pipes are to be designed based on open channel principle. As such for pipes at a gradient of less than 10° from horizontal are designed as drains with maximum 70% fill rate.
 *Includes any canal, culvert, conduit, river or watercourse. <ref> Code of Practice on Surface water drainage 6th Edition –Dec 2011 </ref>

@@ Line 1: / Line 1: @@
-[1] Near horizontal pipe suspended within a building or buried in the ground to which stacks or ground floor appliances are connected.
+* Near horizontal pipe suspended within a building or buried in the ground to which stacks or ground floor appliances are connected.
-Note: In accordance to BS EN 12056-3:2000, the near horizontal drainage pipes are to be designed based on open channel principle. As such for pipes at a gradient of less than 10 ° from horizontal are designed as drains with maximum 70% fill rate.
+'''Note:''' In accordance to BS EN 12056-3:2000, the near horizontal drainage pipes are to be designed based on open channel principle. As such for pipes at a gradient of less than 10° from horizontal are designed as drains with maximum 70% fill rate.<ref> BS EN 12056-5:2000 </ref>
-The flow in offsets less than 10° to the horizontal shall be calculated as a drain with a filling degree of not more than 70% unless national and local regulation and practice states otherwise.
+*The flow in offsets less than 10° to the horizontal shall be calculated as a drain with a filling degree of not more than 70% unless national and local regulation and practice states otherwise.
-[2] Includes any canal, culvert, conduit, river or watercourse
+*Includes any canal, culvert, conduit, river or watercourse. <ref> Code of Practice on Surface water drainage 6th Edition –Dec 2011 </ref>
-[3] Pipeline, usually underground, designed to carry wastewater from a source to a sewer
+*Pipeline, usually underground, designed to carry wastewater from a source to a sewer. <ref> BS EN 752:2008 </ref>
 == References: ==
-# BS EN 12056-5:2000
+<references />