|
|
| Line 1: |
Line 1: |
| − | {{Redirect|Air pressure|the pressure of air in other systems|pressure}}
| |
| − | {{Continuum mechanics}}
| |
| − | '''Atmospheric pressure''', sometimes also called '''barometric pressure''', is the pressure exerted by the weight of air in the [[atmosphere of Earth]] (or that of another planet). In most circumstances atmospheric pressure is closely approximated by the [[Fluid pressure|hydrostatic pressure]] caused by the [[weight]] of [[Earth's atmosphere|air]] above the measurement point. Low-pressure areas have less atmospheric mass above their location, whereas high-pressure areas have more atmospheric mass above their location. Likewise, as [[elevation]] increases, there is less overlying atmospheric mass, so that atmospheric pressure decreases with increasing elevation. On average, a column of air {{convert|spell=in|1|cm2|abbr=~}} in cross-section, measured from [[sea level]] to the top of the atmosphere, has a [[mass]] of about {{convert|1.03|kg}} and weight of about {{convert|10.1|N|lk=on}}. That force (across one square centimeter) is a pressure of 10.1 N/cm<sup>2</sup> or 101,000 N/m<sup>2</sup>. A column {{convert|1|sqin}} in cross-section would have a weight of about {{cvt|14.7|lb}} or about 65.4 N.
| |
| | | | |
| − | == Standard atmospheric ==
| |
| − | The [[Atmosphere (unit)|standard atmosphere]] (symbol: atm) is a [[Units of pressure|unit of pressure]] defined as {{convert|101,325|Pa|bar|abbr=on|comma=gaps|lk=in}}, equivalent to 760 [[Millimeter of mercury|mmHg]] ([[torr]]), 29.92 [[inHg]] and 14.696 [[Pounds per square inch|psi]].<ref name="icao">International Civil Aviation Organization. ''Manual of the [[ICAO Standard Atmosphere]]'', Doc 7488-CD, Third Edition, 1993. ISBN 92-9194-004-6.</ref>
| |
| − |
| |
| − | == Mean sea level pressure ==
| |
| − | [[File:Mslp-jja-djf.png|thumb|right|15 year average mean sea level pressure for June, July, and August (top) and December, January, and February (bottom). [[ECMWF re-analysis|ERA-15]] re-analysis.]]
| |
| − | [[File:Aircraft altimeter.JPG|right|thumb|Kollsman-type barometric aircraft [[altimeter]] (as used in North America) displaying an [[altitude]] of {{convert|80|ft|abbr=on}}.]]
| |
| − |
| |
| − | The mean sea level pressure (MSLP) is the atmospheric pressure at [[sea level]]. This is the atmospheric pressure normally given in weather reports on radio, television, and newspapers or on the [[Internet]]. When [[barometer]]s in the home are set to match the local weather reports, they measure pressure adjusted to sea level, not the actual local atmospheric pressure.
| |
| − |
| |
| − | The ''[[altimeter setting]]'' in aviation, is an atmospheric pressure adjustment.
| |
| − |
| |
| − | Average ''sea-level pressure'' is {{convert|1013.25|mbar|kPa inHg mmHg|abbr=on|comma=off}}. In aviation weather reports ([[METAR]]), [[QNH]] is transmitted around the world in millibars or hectopascals (1 hectopascal = 1 millibar), except in the [[United States]], [[Canada]], and [[Colombia]] where it is reported in inches (to two decimal places) of [[mercury (element)|mercury]]. The United States and Canada also report ''sea level pressure'' SLP, which is adjusted to sea level by a different method, in the remarks section, not in the internationally transmitted part of the code, in hectopascals or millibars.<ref>[http://www.flightplanning.navcanada.ca/cgi-bin/Fore-obs/metar.cgi?NoSession=NS_Inconnu&format=dcd&Langue=anglais&Region=can&Stations=CYVR&Location= Sample METAR of CYVR] Nav Canada</ref> However, in Canada's public weather reports, sea level pressure is instead reported in kilopascals.<ref>{{citation|url=http://www.cbc.ca/montreal/weather/s0000635.html |title=Montreal Current Weather |publisher=CBC Montreal, Canada |accessdate=2014-03-30}}</ref>
| |
| − |
| |
| − | In the US weather code remarks, three digits are all that are transmitted; decimal points and the one or two most significant digits are omitted: {{convert|1013.2|mbar|kPa|abbr=on|comma=off}} is transmitted as 132; {{convert|1000.0|mbar|kPa|abbr=on|comma=off}} is transmitted as 000; 998.7 mbar is transmitted as 987; etc. The highest ''sea-level pressure'' on [[Earth]] occurs in [[Siberia]], where the [[Siberian High]] often attains a ''sea-level pressure'' above {{convert|1050|mbar|kPa inHg|abbr=on|comma=off}}, with record highs close to {{convert|1085|mbar|kPa inHg|abbr=on|comma=off}}. The lowest measurable ''sea-level pressure'' is found at the centers of [[tropical cyclone]]s and [[tornado]]es, with a record low of {{convert|870|mbar|kPa inHg|abbr=on|comma=off}} (see [[Atmospheric pressure#Records|Atmospheric pressure records]]).
| |
| − |
| |
| − | == Altitude variation ==
| |
| − | [[File:Storm over Snæfellsjökull.jpg|thumb|left|A very local storm above Snæfellsjökull, showing clouds formed on the mountain by [[orographic lift]]]]
| |
| − | [[File:Atmospheric Pressure vs. Altitude.png|thumb|300 px|right|Variation in atmospheric pressure with altitude, computed for 15 °C and 0% relative humidity.]]
| |
| − | [[File:Plastic bottle at 14000 feet, 9000 feet and 1000 feet, sealed at 14000 feet.png|thumb|This plastic bottle was sealed at approximately {{convert|14000|ft|m}} altitude, and was crushed by the increase in atmospheric pressure —at {{convert|9000|ft|m}} and {{convert|1000|ft|m}}— as it was brought down towards sea level.]]
| |
| − |
| |
| − | Pressure varies smoothly from the Earth's surface to the top of the [[mesosphere]]. Although the pressure changes with the weather, NASA has averaged the conditions for all parts of the earth year-round. As altitude increases, atmospheric pressure decreases. One can calculate the atmospheric pressure at a given altitude.<ref>[http://psas.pdx.edu/RocketScience/PressureAltitude_Derived.pdf A quick derivation relating altitude to air pressure] by Portland State Aerospace Society, 2004, accessed 05032011</ref> Temperature and humidity also affect the atmospheric pressure, and it is necessary to know these to compute an accurate figure. The graph at right was developed for a temperature of 15 °C and a relative humidity of 0%.
| |
| − |
| |
| − | At low altitudes above the sea level, the pressure decreases by about 1.2 kPa for every 100 meters. For higher altitudes within the [[troposphere]], the following equation (the [[barometric formula]]) relates atmospheric pressure ''p'' to altitude ''h''
| |
| − | :<math>p = p_0 \cdot \left(1 - \frac{L \cdot h}{T_0} \right)^\frac{g \cdot M}{R_0 \cdot L} \approx p_0 \cdot \left(1 - \frac{g \cdot h}{c_p \cdot T_0} \right)^{\frac{c_p \cdot M}{R_0}},</math>
| |
| − |
| |
| − | :<math>p \approx p_0 \cdot \exp \left(- \frac{g \cdot M \cdot h}{R_0 \cdot T_0} \right)</math>
| |
| − |
| |
| − | where the constant parameters are as described below:
| |
| − | {| class="wikitable"
| |
| − | |-
| |
| − | !|Parameter |||Description|||Value
| |
| − | |-
| |
| − | | ''p''<sub>0</sub> || style="text-align:left;"| sea level standard atmospheric pressure|| style="text-align:right;"| 101325 Pa
| |
| − | |-
| |
| − | | ''L'' || style="text-align:left;"| temperature lapse rate, = g/c<sub>p</sub> for dry air || style="text-align:right;"| 0.0065 K/m
| |
| − | |-
| |
| − | | ''c''<sub>p</sub> || style="text-align:left;"| constant pressure specific heat || style="text-align:right;"| ~ 1007 J/(kg•K)
| |
| − | |-
| |
| − | | ''T''<sub>0</sub>|| style="text-align:left;"| sea level standard temperature || style="text-align:right;"| 288.15 K
| |
| − | |-
| |
| − | | ''g'' || style="text-align:left;"| Earth-surface gravitational acceleration|| style="text-align:right;"| 9.80665 m/s<sup>2</sup>
| |
| − | |-
| |
| − | | ''M'' || style="text-align:left;"| molar mass of dry air|| style="text-align:right;"| 0.0289644 kg/mol
| |
| − | |-
| |
| − | | ''R''<sub>0</sub> || style="text-align:left;"| [[universal gas constant]]|| style="text-align:right;"| 8.31447 J/(mol•K)
| |
| − | |}
| |
| − |
| |
| − | == Local variation ==
| |
| − | [[File:Wilma1315z-051019-1kg12.jpg|thumb|[[Hurricane Wilma]] on 19 October 2005; {{convert|882|hPa|abbr=on}} in the storm's eye]]
| |
| − | Atmospheric pressure varies widely on Earth, and these changes are important in studying [[weather]] and [[climate]]. See [[pressure system]] for the effects of air pressure variations on weather.
| |
| − |
| |
| − | Atmospheric pressure shows a diurnal or semidiurnal (twice-daily) cycle caused by global [[atmospheric tides]]. This effect is strongest in tropical zones, with an amplitude of a few millibars, and almost zero in polar areas. These variations have two superimposed cycles, a circadian (24 h) cycle and semi-circadian (12 h) cycle.
| |
| − |
| |
| − | == Records ==
| |
| − | The highest adjusted-to-sea level barometric pressure ever recorded on Earth (above 750 meters) was {{convert|1085.7|hPa|inHg}} measured in [[Tosontsengel, Zavkhan|Tosontsengel, Mongolia]] on 19 December 2001.<ref name="wmo.asu.edu">{{citation|url=http://wmo.asu.edu/highest-sea-lvl-air-pressure-above-700m |title=World: Highest Sea Level Air Pressure Above 750 m |publisher=Wmo.asu.edu |date=2001-12-19 |accessdate=2013-04-15}}</ref> The highest adjusted-to-sea level barometric pressure ever recorded (below 750 meters) was at Agata, [[Evenk Autonomous Okrug|Evenkiyskiy]], Russia [66°53’N, 93°28’E, elevation: 261 m (856.3 ft)] on 31 December 1968 of {{convert|1083.8|hPa|inHg}}.<ref>{{citation|url=http://wmo.asu.edu/world-highest-sea-level-air-pressure-below-700m |title=World: Highest Sea Level Air Pressure Below 750 m |publisher=Wmo.asu.edu |date=1968-12-31 |accessdate=2013-04-15}}</ref> The discrimination is due to the problematic assumptions (assuming a standard lapse rate) associated with reduction of sea level from high elevations.<ref name="wmo.asu.edu" />
| |
| − |
| |
| − | The [[Dead Sea]], the lowest place on Earth at 425 metres (1400 feet) below sea level, has a correspondingly high typical atmospheric pressure of 1065 hPa.<ref>{{cite journal|last=Kramer|first=MR|author2=Springer C|author3=Berkman N|author4=Glazer M|author5=Bublil M|author6=Bar-Yishay E|author7=Godfrey S|title=Rehabilitation of hypoxemic patients with COPD at low altitude at the Dead Sea, the lowest place on earth|journal=Chest|date=March 1998|volume=113|issue=3|pages=571–575|quote=PMID 9515826|url=http://journal.publications.chestnet.org/data/Journals/CHEST/21761/571.pdf|doi=10.1378/chest.113.3.571|pmid=9515826}}</ref>
| |
| − |
| |
| − | The lowest non-tornadic atmospheric pressure ever measured was 0.858 atm (25.69 inHg), 870 hPa, set on 12 October 1979, during [[Typhoon Tip]] in the western Pacific Ocean. The measurement was based on an instrumental observation made from a reconnaissance aircraft.<ref name=FAQ1>{{cite web|url=http://www.aoml.noaa.gov/hrd/tcfaq/E1.html |title=Subject: E1), Which is the most intense tropical cyclone on record? |author=Chris Landsea|publisher=[[Atlantic Oceanographic and Meteorological Laboratory]]|date=2010-04-21 |accessdate=2010-11-23|authorlink=Chris Landsea| archiveurl= https://web.archive.org/web/20101206200600/http://www.aoml.noaa.gov/hrd/tcfaq/E1.html| archivedate= 6 December 2010 <!--DASHBot-->| deadurl= no}}</ref>
| |
| − |
| |
| − | == Measurement based on depth of water ==
| |
| − | One atmosphere (101 kPa or 14.7 psi) is the pressure caused by the weight of a column of fresh water of approximately 10.3 m (33.8 ft). Thus, a diver 10.3 m underwater experiences a pressure of about 2 atmospheres (1 atm of air plus 1 atm of water). Conversely, 10.3 m is the maximum height to which water can be raised using [[suction]] under standard atmospheric conditions.
| |
| − |
| |
| − | Low pressures such as [[natural gas]] lines are sometimes specified in [[Inch of water|inches of water]], typically written as ''w.c.'' (water column) or ''w.g.'' (inches water gauge). A typical gas-using residential appliance in the US is rated for a maximum of 14 w.c., which is approximately 35 [[hPa]]. Similar metric units with a wide variety of names and notation based on [[Millimeters, water gauge|millimetres]], [[Centimetre of water|centimetres]] or metres are now less commonly used.
| |
| − |
| |
| − | == Boiling point of water ==
| |
| − | [[File:Kochendes wasser02.jpg|thumb|[[Boiling water]]]]
| |
| − | Pure water [[boiling|boils]] at {{convert|100|C}} at earth's standard atmospheric pressure. The boiling point is the temperature at which the [[vapor pressure]] is equal to the atmospheric pressure around the water.<ref>{{citation |url=http://hyperphysics.phy-astr.gsu.edu/hbase/kinetic/vappre.html |title=Vapour Pressure |publisher=Hyperphysics.phy-astr.gsu.edu |accessdate=2012-10-17}}</ref> Because of this, the boiling point of water is lower at lower pressure and higher at higher pressure. Cooking at high elevations, therefore, requires adjustments to recipes.<ref>{{citation |url=http://www.crisco.com/Cooking_Central/Cooking_Tips/Prep_High_Alt.aspx |title=High Altitude Cooking |publisher=Crisco.com |date=2010-09-30 |accessdate=2012-10-17}}</ref> A rough approximation of elevation can be obtained by measuring the temperature at which water boils; in the mid-19th century, this method was used by explorers.<ref>{{cite journal |first=M. N. |last=Berberan-Santos |first2=E. N. |last2=Bodunov |first3=L. |last3=Pogliani |title=On the barometric formula |journal=American Journal of Physics |volume=65 |issue=5 |pages=404–412 |year=1997 |doi=10.1119/1.18555 |bibcode = 1997AmJPh..65..404B |postscript=<!-- Bot inserted parameter. Either remove it; or change its value to "." for the cite to end in a ".", as necessary. -->{{inconsistent citations}} }}</ref>
| |
| − |
| |
| − | == Measurement and maps ==
| |
| − | An important application of the knowledge that atmospheric pressure varies directly with altitude was in determining the height of hills and mountains thanks to the availability of reliable pressure measurement devices. While in 1774 Maskelyne was confirming Newton's theory of gravitation at and on Schiehallion in Scotland (using plumb bob deviation to show the effect of "gravity") and accurately measure elevation, William Roy using barometric pressure was able to confirm his height determinations, the agreement being to within one meter (3.28 feet). This was then a useful tool for survey work and map making and long has continued to be useful. It was part of the "application of science" which gave practical people the insight that applied science could easily and relatively cheaply be "useful".<ref>Hewitt, Rachel, ''Map of a Nation – a Biography of the Ordnance Survey'' ISBN 1-84708-098-7</ref>
| |
| − |
| |
| − | == See also ==
| |
| − | {{portal|Underwater diving}}
| |
| − | {{div col|2}}
| |
| − | * [[Atmosphere (unit)]]
| |
| − | * [[Barometric formula]]
| |
| − | * [[Barotrauma]] – physical damage to body tissues caused by a difference in pressure between an air space inside or beside the body and the surrounding gas or liquid.
| |
| − | * [[Cabin pressurization]]
| |
| − | * [[Effects of high altitude on humans]]
| |
| − | * [[High-pressure area]]
| |
| − | * [[International Standard Atmosphere]] - a tabulation of typical variation of principal thermodynamic variables of the atmosphere (pressure, density, temperature, etc.) with altitude, at middle latitudes.
| |
| − | * [[Low-pressure area]]
| |
| − | * [[NRLMSISE-00]]
| |
| − | * [[Plenum chamber]]
| |
| − | * [[Pressure]]
| |
| − | * [[Subtropical high belts]]
| |
| − | {{div col end}}
| |
| − |
| |
| − | == References ==
| |
| − | {{Reflist|35em}}
| |
| − |
| |
| − | == External links ==
| |
| − | * [https://nationalmaglab.org/education/magnet-academy/watch-play/demos/how-atmospheric-pressure-affects-objects How Atmospheric Pressure Affects Objects] (Audio slideshow from the National High Magnetic Field Laboratory)
| |
| − | * [http://modelweb.gsfc.nasa.gov/atmos/us_standard.html 1976 Standard Atmosphere] from [[NASA]]
| |
| − | * [http://www.pdas.com/atmos.html Source code and equations for the 1976 Standard Atmosphere]
| |
| − | * [http://www.atmosculator.com/The%20Standard%20Atmosphere.html? A mathematical model of the 1976 U.S. Standard Atmosphere]
| |
| − | * [http://www.luizmonteiro.com/StdAtm.aspx Calculator using multiple units and properties for the 1976 Standard Atmosphere]
| |
| − | * [http://www.csgnetwork.com/pressurealtcalc.html Calculator giving standard air pressure at a specified altitude, or altitude at which a pressure would be standard]
| |
| − | * [http://www.physics.org/facts/air.asp Some of the effects of air pressure]
| |
| − | * [http://www.newbyte.co.il/calc.html Atmospheric calculator and Geometric to Pressure altitude converter]
| |
| − |
| |
| − | === Experiments ===
| |
| − | * [http://hyperphysics.phy-astr.gsu.edu/hbase/kinetic/patm.html#atm Movies on atmospheric pressure experiments from] [[Georgia State University]]'s [[QuickTime|HyperPhysics website – requires QuickTime]]
| |
| − | * [http://www.teachertube.com/viewVideo.php?video_id=62613 Test showing a can being crushed after boiling water inside it, then moving it into a tub of ice cold water.]
| |
| − |
| |
| − | {{Meteorological variables}}
| |
| − | {{Diving medicine, physiology and physics}}
| |
| − |
| |
| − | {{Authority control}}
| |
| − |
| |
| − | [[Category:Atmosphere]]
| |
| − | [[Category:Atmospheric thermodynamics]]
| |
| − | [[Category:Pressure]]
| |
| − | [[Category:Underwater diving physics]]
| |
| − |
| |
| − | == Pressure ==
| |
| − |
| |
| − | {{about|pressure in the physical sciences}}
| |
| − | {{Infobox physical quantity
| |
| − | | name = Pressure
| |
| − | | unit = [[Pascal (unit)|Pascal]] (Pa)
| |
| − | | basequantities = 1 [[Newton (unit)|N]]/[[metre|m]]<sup>2</sup> or 1 [[kilogram|kg]]/([[metre|m]]·[[second|s]]<sup>2</sup>)
| |
| − | | symbols = ''p'', ''P''
| |
| − | | derivations = ''p'' = [[force|F]] / [[area|A]]
| |
| − | }}
| |
| − | [[File:Pressure exerted by collisions.svg|thumb|right|250px|alt=A figure showing pressure exerted by particle collisions inside a closed container. The collisions that exert the pressure are highlighted in red.|Pressure as exerted by particle collisions inside a closed container.]]
| |
| − | {{Thermodynamics|cTopic=[[List of thermodynamic properties|System properties]]}}
| |
| − |
| |
| − | '''Pressure''' (symbol: ''p'' or ''P'') is the [[force]] applied perpendicular to the surface of an object per unit [[area]] over which that force is distributed. [[Gauge pressure]] (also spelled ''gage'' pressure)<ref group=lower-alpha>The preferred spelling varies by country and even by industry. Further, both spellings are often used ''within'' a particular industry or country. Industries in British English-speaking countries typically use the "gauge" spelling.</ref> is the pressure relative to the ambient pressure.
| |
| − |
| |
| − | Various [[#Units|units]] are used to express pressure. Some of these derive from a unit of force divided by a unit of area; the [[International System of Units|SI]] unit of pressure, the [[Pascal (unit)|pascal]] (Pa), for example, is one [[newton (unit)|newton]] per [[square metre]]; similarly, the [[Pound (force)|pound-force]] per [[square inch]] ([[Pounds per square inch|psi]]) is the traditional unit of pressure in the [[imperial units|imperial]] and [[United States customary units|US customary]] systems. Pressure may also be expressed in terms of [[standard atmospheric pressure]]; the [[atmosphere (unit)|atmosphere]] (atm) is equal to this pressure and the [[torr]] is defined as {{frac|760}} of this. Manometric units such as the [[centimetre of water]], [[millimetre of mercury]], and [[inch of mercury]] are used to express pressures in terms of the height of [[Pressure measurement#Liquid column|column of a particular fluid]] in a manometer.
| |
| − |
| |
| − | ==Definition==
| |
| − | Pressure is the amount of force acting per unit area. The symbol for it is ''p'' or ''P''.<ref>
| |
| − | {{Cite book |last=Giancoli |first=Douglas G. |title=Physics: principles with applications |year=2004 |publisher=Pearson Education |location=Upper Saddle River, N.J. |isbn=0-13-060620-0 |pages=}}</ref>
| |
| − | The [[IUPAC]] recommendation for pressure is a lower-case ''p''.<ref name="IUPACGoldPressure">
| |
| − | {{cite book |url = http://goldbook.iupac.org/E02281.html|title = IUPAC. Compendium of Chemical Terminology, 2nd ed. (the "Gold Book").|publisher = Blackwell Scientific Publications|author1=McNaught, A. D. |author2=Wilkinson, A. |author3=Nic, M. |author4=Jirat, J. |author5=Kosata, B. |author6=Jenkins, A. |year = 2014|location = Oxford|isbn = 0-9678550-9-8|doi = 10.1351/goldbook.P04819|version = 2.3.3}}</ref>
| |
| − | However, upper-case ''P'' is widely used. The usage of ''P'' vs ''p'' depends upon the field in which one is working, on the nearby presence of other symbols for quantities such as [[Power (physics)|power]] and [[momentum]], and on writing style.
| |
| − |
| |
| − | ===Formula===
| |
| − | {{Conjugate variables (thermodynamics)}}
| |
| − | [[File:Pressure force area.svg|200px|right]]
| |
| − | Mathematically:
| |
| − | :<math>p = \frac{F}{A}</math>
| |
| − | where:
| |
| − | :<math>p</math> is the pressure,
| |
| − | :<math>F</math> is the [[normal force]],
| |
| − | :<math>A</math> is the area of the surface on contact.
| |
| − |
| |
| − | Pressure is a [[Scalar (physics)|scalar]] quantity. It relates the vector surface element (a vector normal to the surface) with the normal force acting on it. The pressure is the scalar [[proportionality constant]] that relates the two normal vectors:
| |
| − | :<math>d\mathbf{F}_n=-p\,d\mathbf{A} = -p\,\mathbf{n}\,dA</math>
| |
| − |
| |
| − | The minus sign comes from the fact that the force is considered towards the surface element, while the normal vector points outward. The equation has meaning in that, for any surface S in contact with the fluid, the total force exerted by the fluid on that surface is the [[surface integral]] over S of the right-hand side of the above equation.
| |
| − |
| |
| − | It is incorrect (although rather usual) to say "the pressure is directed in such or such direction". The pressure, as a scalar, has no direction. The force given by the previous relationship to the quantity has a direction, but the pressure does not. If we change the orientation of the surface element, the direction of the normal force changes accordingly, but the pressure remains the same.
| |
| − |
| |
| − | Pressure is distributed to solid boundaries or across arbitrary sections of fluid ''normal to'' these boundaries or sections at every point. It is a fundamental parameter in [[thermodynamics]], and it is [[conjugate variables (thermodynamics)|conjugate]] to [[Volume (thermodynamics)|volume]].
| |
| − |
| |
| − | ===Units===
| |
| − | [[File:Barometer mercury column hg.jpg|thumb|right|Mercury column]]
| |
| − | The [[SI]] unit for pressure is the [[Pascal (unit)|pascal]] (Pa), equal to one [[newton (unit)|newton]] per [[square metre]] (N/m<sup>2</sup> or kg·m<sup>−1</sup>·s<sup>−2</sup>). This name for the unit was added in 1971;<ref>{{cite web|url=http://www.bipm.fr/en/convention/cgpm/14/pascal-siemens.html |title=14th Conference of the International Bureau of Weights and Measures |publisher=Bipm.fr |date= |accessdate=2012-03-27}}</ref> before that, pressure in SI was expressed simply in newtons per square metre.
| |
| − |
| |
| − | Other units of pressure, such as [[pound-force per square inch|pounds per square inch]] and [[bar (unit)|bar]], are also in common use. The [[Centimetre–gram–second system of units|CGS]] unit of pressure is the [[barye]] (Ba), equal to 1 dyn·cm<sup>−2</sup> or 0.1 Pa. Pressure is sometimes expressed in grams-force or kilograms-force per square centimetre (g/cm<sup>2</sup> or kg/cm<sup>2</sup><!--don't add an f to kg, this is making the point about usage without it-->) and the like without properly identifying the force units. But using the names kilogram, gram, kilogram-force, or gram-force (or their symbols) as units of force is expressly forbidden in SI. The [[technical atmosphere]] (symbol: at) is 1 kgf/cm<sup>2</sup> (98.0665 kPa or 14.223 psi).
| |
| − |
| |
| − | Since a system under pressure has potential to perform work on its surroundings, pressure is a measure of potential energy stored per unit volume. It is therefore related to energy density and may be expressed in units such as [[joule]]s per cubic metre (J/m<sup>3</sup>, which is equal to Pa).
| |
| − | Mathematically:
| |
| − | :<math>p = \frac{F \times \mathrm{distance}}{A \times \mathrm{distance}} = \frac\mathrm{Work} \mathrm{Volume} = \frac \mathrm{Energy\ (J)}\mathrm{Volume\ (m^3)}</math>
| |
| − |
| |
| − | Some [[meteorologist]]s prefer the hectopascal (hPa) for atmospheric air pressure, which is equivalent to the older unit [[millibar]] (mbar). Similar pressures are given in kilopascals (kPa) in most other fields, where the hecto- prefix is rarely used. The inch of mercury is still used in the United States. Oceanographers usually measure underwater pressure in [[decibar]]s (dbar) because pressure in the ocean increases by approximately one decibar per metre depth.
| |
| − |
| |
| − | The [[Atmosphere (unit)|standard atmosphere]] (atm) is an established constant. It is approximately equal to typical air pressure at earth mean sea level and is defined as {{val|101325|u=Pa}}.
| |
| − |
| |
| − | Because pressure is commonly measured by its ability to displace a column of liquid in a [[manometer]], pressures are often expressed as a depth of a particular fluid (e.g., [[centimetres of water]], [[millimetres of mercury]] or [[inches of mercury]]). The most common choices are [[Mercury (element)|mercury]] (Hg) and water; water is nontoxic and readily available, while mercury's high density allows a shorter column (and so a smaller manometer) to be used to measure a given pressure. The pressure exerted by a column of liquid of height ''h'' and density ''ρ'' is given by the hydrostatic pressure equation {{nowrap|1=''p'' = ''ρgh''}}, where ''g'' is the [[gravitational acceleration]]. Fluid density and local gravity can vary from one reading to another depending on local factors, so the height of a fluid column does not define pressure precisely. When millimetres of mercury or inches of mercury are quoted today, these units are not based on a physical column of mercury; rather, they have been given precise definitions that can be expressed in terms of SI units.{{Citation needed|date=January 2013}} One millimetre of mercury is approximately equal to one [[torr]]. The water-based units still depend on the density of water, a measured, rather than defined, quantity. These ''manometric units'' are still encountered in many fields. [[Blood pressure]] is measured in millimetres of mercury in most of the world, and lung pressures in centimetres of water are still common.
| |
| − |
| |
| − | [[Underwater diving|Underwater divers]] use the metre sea water (msw or MSW) and foot sea water (fsw or FSW) units of pressure, and these are the standard units for pressure gauges used to measure pressure exposure in [[diving chamber]]s and [[Dive computer|personal decompression computers]]. A msw is defined as 0.1 bar <span style="font-size:90%">(0.1 bar [= 100000 Pa] = 10000 Pa)</span>, and is not the same as a linear metre of depth, and 33.066 fsw = 1 atm.<ref name="usn T2.10">{{cite book |title=US Navy Diving Manual, 6th revision |pages=2–32 |year=2006 |publisher=US Naval Sea Systems Command |location=United States |url=http://www.supsalv.org/00c3_publications.asp?destPage=00c3&pageID=3.9 |accessdate=2008-06-15 |author=US Navy }}</ref> <span style="font-size:90%">(1 atm [= 101325 Pa] / 33.066 = 3064.326 Pa)</span> Note that the pressure conversion from msw to fsw is different from the length conversion: 10 msw = 32.6336 fsw, while 10 m = 32.8083 ft.<ref>{{cite web|url=http://www.globalsecurity.org/military/library/policy/army/fm/20-11/chap02.pdf|title=U.S. Navy Diving Manual (Chapter 2:Underwater Physics)|page=2.32}}</ref>
| |
| − |
| |
| − | Gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> pressure is often given in units with 'g' appended, e.g. 'kPag', 'barg' or 'psig', and units for measurements of absolute pressure are sometimes given a suffix of 'a', to avoid confusion, for example 'kPaa', 'psia'. However, the US [[National Institute of Standards and Technology]] recommends that, to avoid confusion, any modifiers be instead applied to the quantity being measured rather than the unit of measure<ref>{{cite web |accessdate=2009-07-07 |publisher=NIST |url=http://physics.nist.gov/Pubs/SP811/sec07.html#7.4 |title=Rules and Style Conventions for Expressing Values of Quantities}}</ref> For example, {{nowrap|1="''p''<sub>g</sub> = 100 psi"}} rather than {{nowrap|1="''p'' = 100 psig"}}.
| |
| − |
| |
| − | Differential pressure is expressed in units with 'd' appended; this type of measurement is useful when considering sealing performance or whether a valve will open or close.
| |
| − |
| |
| − | Presently or formerly popular pressure units include the following:
| |
| − | *[[atmosphere (unit)|atmosphere]] (atm)
| |
| − | *manometric units:
| |
| − | **centimetre, inch, millimetre (torr) and micrometre (mTorr, micron) of mercury
| |
| − | **{{anchor|H2O}}Height of equivalent column of water, including [[Millimeters, water gauge|millimetre]] (mm {{chem|H|2|O}}), [[centimetre of water|centimetre]] (cm {{chem|H|2|O}}), metre, inch, and foot of water
| |
| − | *imperial and customary units:
| |
| − | **[[kip (unit)|kip]], [[Ton-force#Short ton-force|short ton-force]], [[Ton-force#Long ton-force|long ton-force]], [[pound-force]], [[ounce-force]], and [[poundal]] per square inch
| |
| − | **short ton-force and long ton-force per square inch
| |
| − | **fsw (feet sea water) used in underwater diving, particularly in connection with diving pressure exposure and [[Decompression (diving)|decompression]]
| |
| − | *non-SI metric units:
| |
| − | **[[bar (unit)|bar]], decibar, [[millibar]]
| |
| − | ***msw (metres sea water), used in underwater diving, particularly in connection with diving pressure exposure and [[Decompression (diving)|decompression]]
| |
| − | **kilogram-force, or kilopond, per square centimetre ([[technical atmosphere]])
| |
| − | **gram-force and tonne-force (metric ton-force) per square centimetre
| |
| − | **[[barye]] ([[dyne]] per square centimetre)
| |
| − | **kilogram-force and tonne-force per square metre
| |
| − | **[[sthene]] per square metre ([[pieze]])
| |
| − |
| |
| − | {{Pressure Units}}
| |
| − |
| |
| − | ===Examples===
| |
| − | [[File:Aluminium cylinder.jpg|120px|thumbnail|right|The effects of an external pressure of 700 bar on an aluminum cylinder with 5 mm wall thickness]]
| |
| − | As an example of varying pressures, a finger can be pressed against a wall without making any lasting impression; however, the same finger pushing a [[thumbtack]] can easily damage the wall. Although the force applied to the surface is the same, the thumbtack applies more pressure because the point concentrates that force into a smaller area. Pressure is transmitted to solid boundaries or across arbitrary sections of fluid ''normal to'' these boundaries or sections at every point. Unlike [[stress (physics)|stress]], pressure is defined as a [[Scalar (physics)|scalar quantity]]. The negative [[gradient]] of pressure is called the [[force density]].
| |
| − |
| |
| − | Another example is of a common knife. If we try to cut a fruit with the flat side it obviously will not cut. But if we take the thin side, it will cut smoothly. The reason is that the flat side has a greater surface area (less pressure) and so it does not cut the fruit. When we take the thin side, the surface area is reduced and so it cuts the fruit easily and quickly. This is one example of a practical application of pressure.
| |
| − |
| |
| − | For gases, pressure is sometimes measured not as an ''absolute pressure'', but relative to [[atmospheric pressure]]; such measurements are called ''gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> pressure''. An example of this is the air pressure in an [[automobile]] [[tire]], which might be said to be "220 [[pascal (unit)|kPa]] (32 psi)", but is actually 220 kPa (32 psi) above atmospheric pressure. Since atmospheric pressure at sea level is about 100 kPa (14.7 psi), the absolute pressure in the tire is therefore about 320 kPa (46.7 psi). In technical work, this is written "a gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> pressure of 220 kPa (32 psi)". Where space is limited, such as on [[pressure gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.-->]]s, [[name plates]], graph labels, and table headings, the use of a modifier in parentheses, such as "kPa (gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.-->)" or "kPa (absolute)", is permitted. In non-[[SI]] technical work, a gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> pressure of 32 psi is sometimes written as "32 psig" and an absolute pressure as "32 psia", though the other methods explained above that avoid attaching characters to the unit of pressure are preferred.<ref>NIST, [http://physics.nist.gov/Pubs/SP811/sec07.html#7.4 ''Rules and Style Conventions for Expressing Values of Quantities''], Sect. 7.4.</ref>
| |
| − |
| |
| − | Gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> pressure is the relevant measure of pressure wherever one is interested in the stress on [[Pressure vessel|storage vessels]] and the plumbing components of fluidics systems. However, whenever equation-of-state properties, such as densities or changes in densities, must be calculated, pressures must be expressed in terms of their absolute values. For instance, if the atmospheric pressure is 100 kPa, a gas (such as helium) at 200 kPa (gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.-->) (300 kPa [absolute]) is 50% denser than the same gas at 100 kPa (gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.-->) (200 kPa [absolute]). Focusing on gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> values, one might erroneously conclude the first sample had twice the density of the second one.
| |
| − |
| |
| − | ===Scalar nature===
| |
| − | In a static [[gas]], the gas as a whole does not appear to move. The individual molecules of the gas, however, are in constant [[Brownian motion|random motion]]. Because we are dealing with an extremely large number of molecules and because the motion of the individual molecules is random in every direction, we do not detect any motion. If we enclose the gas within a container, we detect a pressure in the gas from the molecules colliding with the walls of our container. We can put the walls of our container anywhere inside the gas, and the force per unit area (the pressure) is the same. We can shrink the size of our "container" down to a very small point (becoming less true as we approach the atomic scale), and the pressure will still have a single value at that point. Therefore, pressure is a scalar quantity, not a vector quantity. It has magnitude but no direction sense associated with it. Pressure acts in all directions at a point inside a gas. At the surface of a gas, the pressure force acts perpendicular (at right angle) to the surface.
| |
| − |
| |
| − | A closely related quantity is the [[stress (physics)|stress]] tensor ''σ'', which relates the vector force <math>\vec{F}</math> to the
| |
| − | [[vector area]] <math>\vec{A}</math> via the linear relation <math>\vec{F}=\sigma\vec{A}\,</math>.
| |
| − |
| |
| − | This [[tensor]] may be expressed as the sum of the [[viscous stress tensor]] minus the hydrostatic pressure. The negative of the stress tensor is sometimes called the pressure tensor, but in the following, the term "pressure" will refer only to the scalar pressure.
| |
| − |
| |
| − | According to the theory of [[general relativity]], pressure increases the strength of a gravitational field (see [[stress–energy tensor]]) and so adds to the mass-energy cause of [[gravity]]. This effect is unnoticeable at everyday pressures but is significant in [[neutron star]]s, although it has not been experimentally tested.<ref>{{cite web|url=http://www.springerlink.com/content/c3540l4q9nr17627/ |title=Einstein's gravity under pressure |publisher=Springerlink.com |date= |accessdate=2012-03-27}}</ref>
| |
| − |
| |
| − | ==Types==
| |
| − |
| |
| − | ===Fluid pressure===
| |
| − |
| |
| − | '''Fluid pressure''' is the pressure at some point within a [[fluid]], such as water or air (for more information specifically about liquid pressure, see [[Pressure#Liquid pressure|section below]]).
| |
| − |
| |
| − | Fluid pressure occurs in one of two situations:
| |
| − | # an open condition, called "open channel flow", e.g. the ocean, a swimming pool, or the atmosphere.
| |
| − | # a closed condition, called "closed conduit", e.g. a water line or gas line.
| |
| − |
| |
| − | Pressure in open conditions usually can be approximated as the pressure in "static" or non-moving conditions (even in the ocean where there are waves and currents), because the motions create only negligible changes in the pressure. Such conditions conform with principles of [[fluid statics]]. The pressure at any given point of a non-moving (static) fluid is called the '''hydrostatic pressure'''. <!--For bolding note that this page is the target of redirection from "hydrostatic pressure"-->
| |
| − |
| |
| − | Closed bodies of fluid are either "static", when the fluid is not moving, or "dynamic", when the fluid can move as in either a pipe or by compressing an air gap in a closed container. The pressure in closed conditions conforms with the principles of [[fluid dynamics]].
| |
| − |
| |
| − | The concepts of fluid pressure are predominantly attributed to the discoveries of [[Blaise Pascal]] and [[Daniel Bernoulli]]. [[Bernoulli's equation]] can be used in almost any situation to determine the pressure at any point in a fluid. The equation makes some assumptions about the fluid, such as the fluid being ideal<ref name=Finnemore>{{cite book |last=Finnemore, John, E. and Joseph B. Franzini |title=Fluid Mechanics: With Engineering Applications |year=2002 |publisher=McGraw Hill, Inc. |location=New York |isbn=978-0-07-243202-2 |pages=14–29}}</ref> and incompressible.<ref name=Finnemore/> An ideal fluid is a fluid in which there is no friction, it is [[inviscid]] <ref name=Finnemore/> (zero [[viscosity]]).<ref name=Finnemore/> The equation for all points of a system filled with a constant-density fluid is
| |
| − | :<math>\frac{p}{\gamma}+\frac{v^2}{2g}+z=\mbox{const}</math><ref name=NCEES>{{cite book|last=NCEES|title=Fundamentals of Engineering: Supplied Reference Handbook|year=2011|publisher=NCEES|location=Clemson, South Carolina|isbn=978-1-932613-59-9|page=64}}</ref>
| |
| − |
| |
| − | where:
| |
| − | :''p'' = pressure of the fluid
| |
| − | :''γ'' = ''ρg'' = density·acceleration of gravity = [[specific weight]] of the fluid.<ref name=Finnemore/>
| |
| − | :''v'' = velocity of the fluid
| |
| − | :''g'' = [[acceleration of gravity]]
| |
| − | :''z'' = elevation
| |
| − | :<math>\frac{p}{\gamma}</math> = pressure head
| |
| − | :<math>\frac{v^2}{2g}</math> = velocity head
| |
| − |
| |
| − | ====Applications====
| |
| − | * [[Hydraulic brakes]]
| |
| − | * [[Artesian well]]
| |
| − | * [[Blood pressure]]
| |
| − | * [[Hydraulic head]]
| |
| − | * [[Turgor pressure|Plant cell turgidity]]
| |
| − | * [[Pythagorean cup]]
| |
| − |
| |
| − | ===Explosion or deflagration pressures===
| |
| − | [[Explosion]] or [[deflagration]] pressures are the result of the ignition of explosive [[gas]]es, mists, dust/air suspensions, in unconfined and confined spaces.
| |
| − |
| |
| − | === Negative pressures ===
| |
| − |
| |
| − | [[File:13-07-23-kienbaum-unterdruckkammer-33.jpg|thumb|Low pressure chamber in [[Bundesleistungszentrum Kienbaum]], Germany]]
| |
| − |
| |
| − | While '''pressures''' are, in general, positive, there are several situations in which negative pressures may be encountered:
| |
| − | *When dealing in relative (gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.-->) pressures. For instance, an absolute pressure of 80 kPa may be described as a gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> pressure of −21 kPa (i.e., 21 kPa below an atmospheric pressure of 101 kPa).
| |
| − | *When attractive [[intermolecular force]]s (e.g., [[van der Waals force]]s<!--"van", see [[Talk:Van der Waals#Van should be capitalized unless preceded by first name]] rebuttal--> or [[hydrogen bond]]s) between the particles of a fluid exceed repulsive forces due to thermal motion. These forces explain [[ascent of sap]] in tall plants. An apparent negative pressure must act on water molecules at the top of any tree taller than 10 m, which is the [[pressure head]] of water that balances the atmospheric pressure. Intermolecular forces maintain cohesion of columns of sap that run continuously in [[xylem]] from the roots to the top leaves.<ref>{{cite web| title=The Physics of Negative Pressure | url=http://discovermagazine.com/2003/mar/featscienceof |publisher=[[Discover (magazine)|Discover]] |author= Karen Wright | accessdate= 31 January 2015| date= March 2003}}</ref>
| |
| − | *The [[Casimir effect]] can create a small attractive force due to interactions with [[vacuum energy]]; this force is sometimes termed "vacuum pressure" (not to be confused with the negative ''gauge<!--Editors are asked to PLEASE check the discussion page for this article before making changes regarding "gauge" vs. "gage" spelling issues. Much debate has transpired on this issue.--> pressure'' of a vacuum).
| |
| − | *For non-isotropic stresses in rigid bodies, depending on how the orientation of a surface is chosen, the same distribution of forces may have a component of positive pressure along one [[Normal (geometry)|surface normal]], with a component of negative pressure acting along another surface normal.
| |
| − | **The stresses in an [[electromagnetic field]] are generally non-isotropic, with the pressure normal to one surface element (the [[normal stress]]) being negative, and positive for surface elements perpendicular to this.
| |
| − | *In the [[cosmological constant]].
| |
| − |
| |
| − | ===Stagnation pressure===<!--This section is linked from [[Drag equation]]-->
| |
| − | [[Stagnation pressure]] is the pressure a fluid exerts when it is forced to stop moving. Consequently, although a fluid moving at higher speed will have a lower [[static pressure]], it may have a higher stagnation pressure when forced to a standstill. Static pressure and stagnation pressure are related by:
| |
| − | :<math>p_{0} = \frac{1}{2}\rho v^2 + p</math>
| |
| − |
| |
| − | where
| |
| − | :<math>p_0</math> is the [[stagnation pressure]]
| |
| − | :<math>v</math> is the flow velocity
| |
| − | :<math>p</math> is the static pressure.
| |
| − |
| |
| − | The pressure of a moving fluid can be measured using a [[Pitot tube]], or one of its variations such as a [[Kiel probe]] or [[Cobra probe]], connected to a [[manometer]]. Depending on where the inlet holes are located on the probe, it can measure static pressures or stagnation pressures.
| |
| − |
| |
| − | ===Surface pressure and surface tension===
| |
| − | There is a two-dimensional analog of pressure – the lateral force per unit length applied on a line perpendicular to the force.
| |
| − |
| |
| − | Surface pressure is denoted by π and shares many similar properties with three-dimensional pressure. Properties of surface chemicals can be investigated by measuring pressure/area isotherms, as the two-dimensional analog of [[Boyle's law]], {{nowrap|''πA'' {{=}} ''k''}}, at constant temperature.
| |
| − | :<math>\pi = \frac{F}{l}</math>
| |
| − |
| |
| − | [[Surface tension]] is another example of surface pressure, but with a reversed sign, because "tension" is the opposite to "pressure".
| |
| − |
| |
| − | === Pressure of an ideal gas ===
| |
| − | {{main article|Ideal gas law}}
| |
| − | In an [[ideal gas]], molecules have no volume and do not interact. According to the [[ideal gas law]], pressure varies linearly with temperature and quantity, and inversely with volume.
| |
| − | :<math>p=\frac{nRT}{V}</math>
| |
| − |
| |
| − | where:
| |
| − | :''p'' is the absolute pressure of the gas
| |
| − | :''n'' is the [[amount of substance]]
| |
| − | :''T'' is the absolute temperature
| |
| − | :''V'' is the volume
| |
| − | :''R'' is the [[ideal gas constant]].
| |
| − |
| |
| − | [[Real gas]]es exhibit a more complex dependence on the variables of state.<ref>P. Atkins, J. de Paula ''Elements of Physical Chemistry'', 4th Ed, W.H. Freeman, 2006. ISBN 0-7167-7329-5.</ref>
| |
| − |
| |
| − | ===Vapor pressure===
| |
| − | {{main article|Vapor pressure}}
| |
| − | Vapor pressure is the pressure of a [[vapor]] in [[thermodynamic equilibrium]] with its condensed [[Phase (matter)|phase]]s in a closed system. All liquids and [[solid]]s have a tendency to [[evaporate]] into a gaseous form, and all [[gas]]es have a tendency to [[condense]] back to their liquid or solid form.
| |
| − |
| |
| − | The [[atmospheric pressure]] [[boiling point]] of a liquid (also known as the [[normal boiling point]]) is the temperature at which the vapor pressure equals the ambient atmospheric pressure. With any incremental increase in that temperature, the vapor pressure becomes sufficient to overcome atmospheric pressure and lift the liquid to form vapor bubbles inside the bulk of the substance. [[liquid bubble|Bubble]] formation deeper in the liquid requires a higher pressure, and therefore higher temperature, because the fluid pressure increases above the atmospheric pressure as the depth increases.
| |
| − |
| |
| − | The vapor pressure that a single component in a mixture contributes to the total pressure in the system is called [[partial pressure|partial vapor pressure]].
| |
| − |
| |
| − | ===Liquid pressure===
| |
| − | {{See also|Fluid statics#Pressure in fluids at rest}}
| |
| − | {{Continuum mechanics}}
| |
| − | When a person swims under the water, water pressure is felt acting on the person's eardrums. The deeper that person swims, the greater the pressure. The pressure felt is due to the weight of the water above the person. As someone swims deeper, there is more water above the person and therefore greater pressure. The pressure a liquid exerts depends on its depth.
| |
| − |
| |
| − | Liquid pressure also depends on the density of the liquid. If someone was submerged in a liquid more dense than water, the pressure would be correspondingly greater. The pressure due to a liquid in liquid columns of constant density or at a depth within a substance is represented by the following formula:
| |
| − | :<math>p=\rho gh</math>
| |
| − |
| |
| − | where:
| |
| − | :''p'' is liquid pressure
| |
| − | :''g'' is gravity at the surface of overlaying material
| |
| − | :''ρ'' is [[density]] of liquid
| |
| − | :''h'' is height of liquid column or depth within a substance.
| |
| − |
| |
| − | Another way of saying this <u>same</u> formula is the following:
| |
| − |
| |
| − | :<math>p = \text{weight density} \times \!\, \text{depth}</math>
| |
| − |
| |
| − | {| class="toccolours collapsible collapsed" width="60%" style="text-align:left"
| |
| − | !Derivation of this equation
| |
| − | |-
| |
| − | |This is derived from the definitions of pressure and weight density. Consider an area at the bottom of a vessel of liquid. The weight of the column of liquid directly above this area produces pressure. From the definition:
| |
| − |
| |
| − | :<math>\text{Weight density} = \frac{\text{weight}}{\text{volume}}</math>
| |
| − |
| |
| − | we can express this weight of liquid as
| |
| − |
| |
| − | :<math>\text{Weight} = \text{weight density} \times \!\, \text{volume}</math>
| |
| − |
| |
| − | where the volume of the column is simply the area multiplied by the depth. Then we have
| |
| − |
| |
| − | :<math>\text{Pressure} = \frac{\text{force}}{\text{area}} = \frac{\text{weight}}{\text{area}} = \frac{\text{weight density} \times \!\, \text{volume}}{\text{area}}</math>
| |
| − |
| |
| − | :<math>\text{Pressure} = \frac{\text{weight density} \times \!\, \text{(area} \times \!\, \text{depth)}}{\text{area}}</math>
| |
| − |
| |
| − | With the "area" in the numerator and the "area" in the denominator canceling each other out, we are left with:
| |
| − |
| |
| − | :<math>\text{Pressure} = \text{weight density} \times \!\, \text{depth}</math>
| |
| − |
| |
| − | Written with symbols, this is our original equation:
| |
| − | :<math>p=\rho gh</math>
| |
| − | |}
| |
| − |
| |
| − | The pressure a liquid exerts against the sides and bottom of a container depends on the density and the depth of the liquid. If atmospheric pressure is neglected, liquid pressure against the bottom is twice as great at twice the depth; at three times the depth, the liquid pressure is threefold; etc. Or, if the liquid is two or three times as dense, the liquid pressure is correspondingly two or three times as great for any given depth. Liquids are practically incompressible – that is, their volume can hardly be changed by pressure (water volume decreases by only 50 millionths of its original volume for each atmospheric increase in pressure). Thus, except for small changes produced by temperature, the density of a particular liquid is practically the same at all depths.
| |
| − |
| |
| − | Atmospheric pressure pressing on the surface of a liquid must be taken into account when trying to discover the ''total'' pressure acting on a liquid. The total pressure of a liquid, then, is ''ρgh'' plus the pressure of the atmosphere. When this distinction is important, the term ''total pressure'' is used. Otherwise, discussions of liquid pressure refer to pressure without regard to the normally ever-present atmospheric pressure.
| |
| − |
| |
| − | It is important to recognize that the pressure does not depend on the ''amount'' of liquid present. Volume is not the important factor – depth is. The average water pressure acting against a dam depends on the average depth of the water and not on the volume of water held back. For example, a wide but shallow lake with a depth of {{convert|3|m|0|abbr=on}} exerts only half the average pressure that a small {{convert|6|m|abbr=on}} deep pond does (note that the ''total force'' applied to the longer dam will be greater, due to the greater total surface area for the pressure to act upon, but for a given 5-foot section of each dam, the 10 ft deep water will apply half the force of 20 ft deep water). A person will feel the same pressure whether his/her head is dunked a metre beneath the surface of the water in a small pool or to the same depth in the middle of a large lake. If four vases contain different amounts of water but are all filled to equal depths, then a fish with its head dunked a few centimetres under the surface will be acted on by water pressure that is the same in any of the vases. If the fish swims a few centimetres deeper, the pressure on the fish will increase with depth and be the same no matter which vase the fish is in. If the fish swims to the bottom, the pressure will be greater, but it makes no difference what vase it is in. All vases are filled to equal depths, so the water pressure is the same at the bottom of each vase, regardless of its shape or volume. If water pressure at the bottom of a vase were greater than water pressure at the bottom of a neighboring vase, the greater pressure would force water sideways and then up the narrower vase to a higher level until the pressures at the bottom were equalized. Pressure is depth dependent, not volume dependent, so there is a reason that water seeks its own level.
| |
| − |
| |
| − | Restating this as energy equation, the energy per unit volume in an ideal, incompressible liquid is constant throughout its vessel. At the surface, gravitational potential energy is large but liquid pressure energy is low. At the bottom of the vessel, all the gravitational potential energy is converted to pressure energy. The sum of pressure energy and gravitational potential energy per unit volume is constant throughout the volume of the fluid and the two energy components change linearly with the depth.<ref>Streeter, V.L., ''Fluid Mechanics'', Example 3.5, McGraw–Hill Inc. (1966), New York.</ref> Mathematically, it is described by [[Bernoulli's equation]] where velocity head is zero and comparisons per unit volume in the vessel are:
| |
| − | :<math>\frac{p}{\gamma}+z=\mbox{const}</math>
| |
| − |
| |
| − | Terms have the same meaning as in [[#Fluid pressure|section Fluid pressure]].
| |
| − |
| |
| − | ===Direction of liquid pressure===
| |
| − | An experimentally determined fact about liquid pressure is that it is exerted equally in all directions.<ref name="Hewitt">Hewitt 251 (2006)</ref> If someone is submerged in water, no matter which way that person tilts his/her head, the person will feel the same amount of water pressure on his/her ears. Because a liquid can flow, this pressure isn't only downward. Pressure is seen acting sideways when water spurts sideways from a leak in the side of an upright can. Pressure also acts upward, as demonstrated when someone tries to push a beach ball beneath the surface of the water. The bottom of a boat is pushed upward by water pressure ([[buoyancy]]).
| |
| − |
| |
| − | When a liquid presses against a surface, there is a net force that is perpendicular to the surface. Although pressure doesn't have a specific direction, force does. A submerged triangular block has water forced against each point from many directions, but components of the force that are not perpendicular to the surface cancel each other out, leaving only a net perpendicular point.<ref name="Hewitt" /> This is why water spurting from a hole in a bucket initially exits the bucket in a direction at right angles to the surface of the bucket in which the hole is located. Then it curves downward due to gravity. If there are three holes in a bucket (top, bottom, and middle), then the force vectors perpendicular to the inner container surface will increase with increasing depth – that is, a greater pressure at the bottom makes it so that the bottom hole will shoot water out the farthest. The force exerted by a fluid on a smooth surface is always at right angles to the surface. The speed of liquid out of the hole is <math>\scriptstyle \sqrt{2gh}</math>, where ''h'' is the depth below the free surface.<ref name="Hewitt" /> Interestingly, this is the same speed the water (or anything else) would have if freely falling the same vertical distance ''h''.
| |
| − |
| |
| − | ===Kinematic pressure===
| |
| − | :<math>P=p/\rho_0</math>
| |
| − | is the kinematic pressure, where <math>p</math> is the pressure and <math>\rho_0</math> constant mass density. The SI unit of ''P'' is m<sup>2</sup>/s<sup>2</sup>. Kinematic pressure is used in the same manner as [[kinematic viscosity]] <math>\nu</math> in order to compute [[Navier–Stokes equation]] without explicitly showing the density <math>\rho_0</math>.
| |
| − |
| |
| − | ;Navier–Stokes equation with kinematic quantities
| |
| − | :<math> \frac{\partial u}{\partial t} + (u \nabla) u = - \nabla P + \nu \nabla^2 u </math>
| |
| − |
| |
| − | ==See also==
| |
| − | {{portal|Underwater diving}}
| |
| − | {{cmn|3|
| |
| − | *[[Atmospheric pressure]]
| |
| − | *[[Blood pressure]]
| |
| − | *[[Boyle's Law]]
| |
| − | *[[Combined gas law]]
| |
| − | *[[Conversion of units]]
| |
| − | *[[Critical point (thermodynamics)]]
| |
| − | *[[Dynamic pressure]]
| |
| − | *[[Hydraulics]]
| |
| − | *[[Internal pressure]]
| |
| − | *[[Kinetic theory of gases#Pressure and kinetic energy|Kinetic theory]]
| |
| − | *[[Microphone]]
| |
| − | *[[Orders of magnitude (pressure)]]
| |
| − | *[[Partial pressure]]
| |
| − | *[[Pressure measurement]]
| |
| − | *[[Pressure sensor]]
| |
| − | *[[Sound pressure]]
| |
| − | *[[Spouting can]]
| |
| − | *[[Timeline of temperature and pressure measurement technology]]
| |
| − | *[[Units conversion by factor-label]]
| |
| − | *[[Vacuum]]
| |
| − | *[[Vacuum pump]]
| |
| − | *[[Vertical pressure variation]]
| |
| − | }}
| |
| − |
| |
| − | ==Notes==
| |
| − | {{Reflist|group=lower-alpha}}
| |
| − |
| |
| − | ==References==
| |
| − | {{reflist|30em}}
| |
| − |
| |
| − | ==External links==
| |
| − | *[http://www.physnet.org/modules/pdf_modules/m48.pdf ''Introduction to Fluid Statics and Dynamics''] on [http://www.physnet.org/ Project PHYSNET]
| |
| − | *[http://www.grc.nasa.gov/WWW/K-12/airplane/pressure.html Pressure being a scalar quantity]
| |
| − |
| |
| − | {{Diving medicine, physiology and physics}}
| |
| − |
| |
| − | {{Authority control}}
| |
| − |
| |
| − | [[Category:Atmospheric thermodynamics]]
| |
| − | [[Category:Underwater diving physics]]
| |
| − | [[Category:Concepts in physics]]
| |
| − | [[Category:Fluid dynamics]]
| |
| − | [[Category:Fluid mechanics]]
| |
| − | [[Category:Hydraulics]]
| |
| − | [[Category:Pressure| ]]
| |
| − | [[Category:Thermodynamic properties]]
| |
| − | [[Category:State functions]]
| |
