Difference between revisions of "Gully"

From flowpedia.com
Jump to: navigation, search
(Created page with "Discharge fitting the top of which is a grating or cover capable of installation at ground, floor or roof level, intended to receive wastewater either through apertures in the...")
 
Line 6: Line 6:
 
[[File:Gully_non-trapped.jpeg]]
 
[[File:Gully_non-trapped.jpeg]]
  
'''Grating'''. Removable component with apertures which permit the discharge of waste water
+
'''Grating''' - Removable component with apertures which permit the discharge of waste water
  
'''Frame'''. Support for a grating or cover which is connected to a body either directly or by means of a membrane clamping collar or an extension
+
'''Frame''' - Support for a grating or cover which is connected to a body either directly or by means of a membrane clamping collar or an extension
  
'''Cover'''. Removable part of an access cover which covers the opening
+
'''Cover''' - Removable part of an access cover which covers the opening
  
'''Body'''. Part of a gully below or in the floor, ground or roof on which the grating/ frame/ extension is mounted, and to which pipework is connected
+
'''Body''' - Part of a gully below or in the floor, ground or roof on which the grating/ frame/ extension is mounted, and to which pipework is connected
  
'''Extension'''. Component used to adjust the height of a grating or cover above a body
+
'''Extension''' - Component used to adjust the height of a grating or cover above a body
  
'''Membrane clamping ring'''. Component used to clamp a membrane or a sheet floor covering to a body or extension
+
'''Membrane clamping ring''' - Component used to clamp a membrane or a sheet floor covering to a body or extension
  
'''Connecting flange'''. Separate or an integral part of a body or of an extension which receives a membrane or sheet floor covering
+
'''Connecting flange''' - Separate or an integral part of a body or of an extension which receives a membrane or sheet floor covering
  
 
== References ==
 
== References ==
 
#BS EN 1253-1:2003
 
#BS EN 1253-1:2003

Revision as of 12:28, 18 July 2017

Discharge fitting the top of which is a grating or cover capable of installation at ground, floor or roof level, intended to receive wastewater either through apertures in the grating and/or from pipes connected to the body of the gully. Note: A gully can include an integral trap and a sediment bucket.


Images

Error creating thumbnail: Unable to save thumbnail to destination

Grating - Removable component with apertures which permit the discharge of waste water

Frame - Support for a grating or cover which is connected to a body either directly or by means of a membrane clamping collar or an extension

Cover - Removable part of an access cover which covers the opening

Body - Part of a gully below or in the floor, ground or roof on which the grating/ frame/ extension is mounted, and to which pipework is connected

Extension - Component used to adjust the height of a grating or cover above a body

Membrane clamping ring - Component used to clamp a membrane or a sheet floor covering to a body or extension

Connecting flange - Separate or an integral part of a body or of an extension which receives a membrane or sheet floor covering

References

  1. BS EN 1253-1:2003